Richardson Texas – Club Call K5RWK
By Chip Coker KD4C (source AMSAT) One of the easiest ways to get started with amateur satellites is to start with maybe the most known and prominent one – the International Space Station (ISS). It orbits around 250 miles overhead…
Read more
As promised (and on schedule!), here’s The Chawed Rag for October 2021. Thanks to all of you that sent me notes on the September relaunch – I appreciate the thanks and the feedback. I’m still interested in what everyone thinks…
Read more
By Chip Coker KD4C By now, you may have seen or heard that the FCC published a change to their regulations in December 2019 that changes the Rules on RF Exposure evaluations. In short, in the past the Amateur Service…
Read more
By Jon Suehiro NN5T You see this image on RWK home page – https://www.k5rwk.org/ . But what does it mean? You also hear about Solar Cycle 25. What do you need to know about the current propagation and solar conditions?…
Read more
By Jon Suehiro NN5T The rest of the year tends to be a busy time if you are into “Radiosport” or contesting. There are several of the better contest events that are coming up in late October, November and early…
Read more
By Joe Hodgkins KI5O With wonderful consideration from Doug KD5OUG and direction from Grant W5XJ, I was fortunate to take intopossession an incomplete Knight T-60 Transmitter. Upon receipt of the contents in an original Knight box, I foundthe following correspondence…
Read more
Our Annual Show & Tell Night allows our members to “show off” to the entire klub something that they’ve been working on – a kit, radio, antenna, modification, or some other cool radio project – over the past year. In…
Read more
Our guest speaker will be Alan Wolke W2AEW. Alan is an Electrical Engineer and has been a has been a Field Applications Engineer for Tektronix since 2006 (so he might know a thing or two about test equipment). He was…
Read more
By John Slaughter WB5HSI Recently I was faced with trying to repair a battery-operated device and had the usual problem of how to make connections to the battery. Normally a spot welder is used to weld nickel strips to the…
Read more
By Chip Coker KD4C As we mentioned earlier in the year, we’ve been hard at work planning some improvements to the K5RWK repeater systems. There are three separate activities in work. Improvements to the main Palisades repeater site Relocation of…
Read more